
Closet installation - Dryer only
3"
(7.6 cm)
4in2. _
3"
5cm2)C7.6cm)
Io"1- 31v="_o"1
(0cm) (80cm) (0cm)
AB
A. Side view - closet or confined area
B. Closet door with vents
Recessed or closet installation - Dryer on pedestal
H
0"_ | _- 27" | I0"_ 31!/2"1 0"I |
(0 cm) | (68.6era) ' Coera) | COera) C8Oera) COera) |
| A | B |
A. Recessed area
B. Side view - closet or confined area
Mobile home - additional installation requirements
This dryer is suitable for mobile home installations.
The installation must conform to the Canadian Manufactured Home Standard, CAN/CSA Z240 MH.
Mobile home installations require:
•Metal exhaust system hardware which is available for purchase from your local Sears store or Sears Service Center.
Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening.
Electdcam Shock Hazard
Pmug into a grounded 4 prong outmet.
Failure to do so can resumt in death or electricam shock.
It is your responsibility
•To contact a qualified electrical installer.
To be sure that the electrical connection is adequate and in conformance with the Canadian Electrical Code, C22.1
To supply the required 4 wire, single phase,
This dryer is equipped with a CSA International Certified Power Cord intended to be plugged into a standard
•Do not use an extension cord.
If using a replacement power supply cord, it is recommended that you use Power Supply Cord Replacement Part Number 3394208. For further information, please call