Kenwood DDX5034M Basic Operations

Basic Operations

A

SI indicator

B

C

D

E

C	B
Turns power ON/OFF	Switches to the Navigation system
Press the button to turn on the power.	Press the button to switch the display to the
When the button is pressed and held down for	navigation system screen.
1 second or more, the power is turned off.

E

Adjusts the volume

Turn it either way to adjust the volume.

Playing a USB device

E

Attenuates the volume

Press it to attenuate the volume. Press it again to cancel muting.

When connecting a USB device, playback starts automatically.

⁄

• If the USB source is selected when a USB device is not connected, "No Device" is displayed.

• When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed.

• Make sure that the USB device is connected firmly.

Removing the USB device

Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. See <USB Device Control> (page 34).

¤

• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

10 DDX5034/DDX5034M