9Adjusts the volume of the present source based on the difference level of original volume.
⁄
•If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud.
Equalizer Control
You can set up the equalizer.
1Display Equalizer Control
Touch 
in the "Audio Control Menu" screen (page 78).
2Display the Equalizer screen
1
2
3
1Selects an equalizer curve type. You can select any of the following equalizer curves.
•"Natural"
•"Rock"
•"Pops"
•"Easy"
•"Top40"
•"Jazz"
•"User"
⁄
•"User" can be selected after tone adjustment is carried out. See <Tone Setup> (page 79).
2Selects items to be adjusted for tone curve setup.
If turned "OFF", only Level can be setup for tone curves.
3Displays the Tone curve setup screen. (page 79)
Tone Setup
You can set a Tone curve.
1Display the Tone screen
See <Equalizer Control> (page 79).
2Set the Tone
1
25
36
47
8
9
1Tone curve becomes flat.
2Bass adjustment items are displayed.
3Middle adjustment items are displayed.
4Treble adjustment items are displayed.
5Sets the Center frequency.
6Sets the level.
7Sets the Q factor. (Only Bass and Middle can be set)
8Bass DC Extend settings (Only when Bass is selected)
If turned "ON", it extends the bass center frequency to the low register by approximately 20%.
9Returns to the "Equalizer" screen.
English 79