Hands Free Unit Control
⁄
•The Outgoing Calls list screen or Incoming Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the
Calling by Voice Recognition
Calls by recognizing the registered voice.
⁄
•In order to perform voice recognition, voice must be registered in the Phonebook data. See <Voice Registration> (page 52). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.) of Phonebook data, a key word voice must be registered. See <Key Word Voice Registration> (page 53).
1Display the Voice Recognition screen
2Utter the voice registered in the PhoneBook
1
Utter within 2 seconds after the Beep.
1Cancels voice recognition.
If the voice recognition is succeeded and there is only one phone number found:
2
Make a call.
2Displays the phonebook list.
If you hear another Beep sound:
Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number.
Make a call.
⁄
•If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep. For how to register key word, see <Key Word Voice Registration> (page 53).
If there are more than one phone numbers registered under the same name, go to step 3.
3Select a Phone number category
3
5 |
| 6 |
4
7
8
3Calls the displayed phone number.
4Creates an SMS to the displayed address. See <SMS (Short Message Service)> (page 55).
5Selects the Phone number category.
6Scrolls the phone number.
7Displays the Phonebook data list.
8Returns to the
4Make a call
⁄
50DDX5034/DDX5034M