Setup Menu
Security Code Setup
You can set a security code to protect your receiver system against theft.
⁄
•When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice.
1Display the Security Code Setup screen
Touch 
in the "Setup Menu" screen (page 56).
1
2
1Displays the Security code input screen.
2Turns the SI function on or off.
If turned "ON", the burglar alarm lamp
flashes when the vehicle ignition is off. (
"ON")
2Start Security Code setup
⁄
•If you have already completed the code registration, 
is displayed.
3Enter a security Code
4Register your security code
5Reenter the security code
Reenter the same security code as that you have entered in Step 3 for confirmation.
⁄
•If you enter a different security code, the screen returns to Step 3 (for the first code entry).
6Register the security code again
Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code.
If you have pressed the Reset button or if you have disconnected the Receiver from battery...
1Enter the correct security code
You must enter the same security code as that you have entered in Step 3.
2Enter the security code
Now, you can use your Receiver.
Input
70DDX5034/DDX5034M