Setup Menu
2Adjust the each color value
2
3
4
1
5
1Selects a preset number to register.
2Adjusts the Red value.
3Adjusts the Green value.
4Adjusts the Blue value.
5Returns to the "Panel Color Coordinate" screen.
3Select a Preset number to register
Adjusted color is registered to the selected Preset button.
4Complete the color coordination
AV Interface Setup
You can set audio and visual (AV) interface parameters.
1Display the AV Interface screen
Touch 
in the "Setup Menu" screen (page 56).
2Setup each item
1
2
3
4
1Moves to the "AV Interface 2" screen.
2Sets a name to be displayed when you
select a system that is connected via the AV INPUT port. (
"VIDEO")
3Sets an image display of the system that is connected via the AV INPUT port. (
"OFF") "OFF": When the image source is switched,
an image entered via the AV INPUT port is displayed.
"ON": When an image signal is entered via the AV INPUT port, this image is displayed.
4Selects a navigation system connection. (
"RGB")
"RGB": Allows the Kenwood's Navigation System to connect via the AV INPUT port.
"Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)
62DDX5034/DDX5034M