Kenwood Adjusting the crossover, frequency, band, make adjustment, 3Adjust the sound of each, Adjusting the sound precisely, 3Select the item to adjust, then

Adjusting the sound precisely1Perform steps 1 and 2 of “Selecting a preset sound mode,” then...

2

3Adjust the sound of eachband.

Selects the band

Flat	Changes level of Bass/
	Middle/Treble to 0.
Frequency	Selects frequency.
Level	Adjusts level.
Q Factor	Adjusts the width of the
	frequency.
Bass EXT	Activates/deactivates
	bass.
SW Level	Adjusts subwoofer level.*

The adjustments are stored and <User> is activated.

*Adjustable only when the subwoofer is activated. (☞ page 50)

Adjusting the crossover

frequency

1On <Top Menu>:

2

3Select the item to adjust, thenmake adjustment.

Adjusts the crossover for front or rear speakers (high pass filter).

Adjusts the crossover for subwoofer (low pass filter).*1

Adjusts the subwoofer level.

Adjusts the cross over frequency.

Selects the phase for the subwoofer. *2

*1 Adjustable only when the subwoofer is activated. (☞ page 50)

*2 Not selectable when <Freq> is set to <Through>.

44 English