Kenwood Installing/Removing the Unit, Installing the Unit, Installation on Toyota, Nissan or Mitsubishi Car using Brackets, Installing the Trim Plate

Installing/Removing the Unit

Installing the Unit

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

For more stable attachment the unit (DDX790/ DDX770/DDX7070BT only)

Bracket

Accessory 8

⁄

•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

Installation on Toyota, Nissan or Mitsubishi Car using Brackets

Accessory 3 (M5x6mm) or accessory 4 (M5x7mm)

Car Bracket

Accessory 3 (M5x6mm) or accessory 4 (M5x7mm)

84 English

Installing the Trim Plate

1Attach accessory 5 to the unit.

Accessory 5

Removing the Trim Plate (DDX470/DDX4070BT/ DDX370/DDX3070 only)

1Engage the catch pins on the extraction key 6 and remove the two locks on the lower part. Lower the frame and pull it forward as shown in the figure.

Accessory 6

Catch

Lock

⁄

•The frame can be removed from the top side in the same manner.

2When the lower part is removed, remove the upper two locations.