Connecting Wirest o Terminals
Bluetooth Microphone (Accessory |
| Subwoofer Preout (monaural) |
|
| |
9) DDX790/DDX770/DDX7070BT/ |
| Connect to vehicle's reverse lamp |
DDX470/DDX4070BT only | Purple/White | |
| (Reverse sensor wire) | harness when using the optional rear |
| view camera. |
Extension cable (Accessory 2)
Antenna Cord | Light Green |
| |
| (Parking sensor wire) |
| For best safety, be sure to connect |
| the parking sensor. |
| ⁄Connect to the vehicle's parking |
| brake detection switch harness. |
FM/AM antenna input | FUSE ( 10A ) |
Accessory 1
White ª / White/black · : To front speaker (left)
Gray ª / Gray/black · : To front speaker (right)
Green ª / Green/black · : To rear speaker (left)
Purple ª / Purple/black · : To rear speaker (right)
If no connections are made, do not let the cable come out from the tab.
Blue
(Antenna control wire)
Blue/White
(Power control wire)
Brown
(Mute control wire)
Light blue/Yellow
(Steering remote control wire)
Orange/White
(Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire) · (To car chassis)
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film- type antenna. (Max. 300 mA, 12 V)
When using the optional power amplifier, connect to its power control terminal.
To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.)
To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matching your car is required.
To car light control switch
ACC | Ignition key switch |
Car fuse box (Main fuse)
Battery
English 81