Hands Free Unit Control

Controlling Tone-based Services

Uses tone base service using DTMF (Dual Tone Multi Frequency).

1Display the Talking screen

See <Calling by Entering a Phone Number> (page 46).

2Display the DTMF input screen3You can send tones during a call
Setting Up the Hands-Free Phone

The Hands-Free system can be set as follows.

1Display the Hands-Free Control screen See <Making a call> (page 45).

2Display the Hands Free Setup screen3Set each item

[Auto Response] Sets an automatic response time to pick-up an incoming call. ( "OFF") "OFF": This function is disabled.

"0-99": Sets the incoming call ringing duration (in seconds).

[Phone Voice] Sets the phone call voice / ringing tone output position. ( "Front All") "Front L": Outputs the phone call voice from

the front left-hand side speaker. "Front R": Outputs the phone call voice from

the front right-hand side speaker. "Front All": Outputs the phone call voice from

both front speakers.

48DDX8034BT/DDX8034BTM