[Call Beep] Sets the beep of the incoming call. ( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] | Sets the beep of the |
incoming SMS. ( | "ON") |
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to use
( "ON") "ON": Yes. "OFF": No.
[SMS Use] Sets the SMS function. ( "ON") "ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone number category with voice recognition.
See <Key Word Voice Registration> (page 50). [Use Phone Voice Recognition] Sets whether
to dial using the phone voice recognition function. ( "ON")
[Echo Cancel] Sets whether to disable the units echo cancelling function.
( "ON")
[Microphone Level] Adjusts the sensitivity of the microphone for a telephone call.
( "6")
[Noise Reduction] Turns the Noise Reduction function On or Off, which adjusts the level of the noise reduction and the quality of the resulting speech signal.
( "ON")
[Restore] Restores the [Echo Cancel], [Microphone Level], or [Noise Reduction] value to the initial value.
⁄
•Either the time interval for automatic answer set on this unit or the time interval set on the
•Select the speaker which is further from the microphone in order to prevent howling or echoes.
Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one
Go through the procedure of <Calling by Phonebook> (page 46).
2Select the name to register11
1Selects a name.
[Record] Registers the voice for voice recognition to the selected Phonebook. If there are already 35 voice tag registered in the same
[Play] Plays the voice registered in the selected Phonebook data.
[Delete] Deletes the voice registered in the selected Phonebook data.
Touch to display the confirmation screen. Touch [Yes] to delete or [No] to cancel.
3Display the voice registration screen4 Say the name to register (1st try)Say within 2 seconds after the Beep.
Next page 3
English 49