Setup Menu

Monitor Angle Control

You can adjust the position of the monitor.

1Display the Angle Setup screen

Touch [] > [] > [System] > [Angle]. (page 59)

2Set the Monitor Angle

1

1Sets the Monitor angle.

[Memory] Stores the current monitor angle as the angle during power off.

EXT SW Setup

Setting up power specification of the external device for which the power is controlled from this unit.

1Display the EXT SW Setup screen

Touch [] > [] > [System] > [EXT SW]. (page 59)

2Perform EXT SW Setup

[SW Name] Sets the name of the external device. See <Character Entry> (page 41) for information on how to enter the name.

[Output Pattern] Sets the power signal output mode.

( EXT SW1: Pulse, EXT SW2: Level)

"Pulse": Generates a single power signal pulse.

"Level": Continues output of high power signal.

Sets to turn output on/off each time the button on the EXT SW Control screen is touched.

[Pulse Set] Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set.

64DDX8034BT/DDX8034BTM