Speaker Setup

You can select a speaker type and its size to get the best sound effects.

1Display the Speaker Select screen

Touch [] > [] > [Audio SETUP] > [Speaker Select]. (page 59)

2Select a speaker you wish to adjust

When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically.

11

22

33

44

1Center speaker

2 Front speaker

3 Rear speaker

4 Subwoofer

[Tweeter] You can set the tweeter when you are selecting front speakers.

If you are using a tweeter together with the front speakers, set the tweeter to "ON". In the "ON" position, the Equalizer is adjusted to its best position.

[X'over] Displays the Speaker Crossover Setup screen.

You can adjust the crossover setup that was set automatically when you selected the speaker type.

3Select a speaker type

You can select any of the following speaker types.

"Center" NONE, 40x70 mm, 5 cm, 10 cm, 13 cm, 16 cm over

"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10

"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10 "Subwoofer" NONE, 16 cm, 20 cm, 25 cm,

30 cm, 38 cm over

⁄

•Select "NONE" if you have no speakers.

•If you set the center speaker to "NONE" even in a short time when you are setting the Surround Control (page 57) to "Bypass+Center", the Surround Control is set to "Bypass" automatically.

•If you set the center and rear speakers to "NONE" when you are setting the Surround Control (page 57) to "Dolby PL II", the Surround Control is set to "Bypass" automatically.

Next page 3

English 73