Setup Menu

Crossover Network Setup

You can set a crossover frequency of speakers.

1Select the speaker to set the crossover

11

22

33

44

1Sets the High Pass Filter of the center speaker.

2Sets the High Pass Filter of the front speaker.

3 Sets the High Pass Filter of the rear speaker. 4 Sets the Low Pass Filter of the sub woofer.

2Display the Crossover setup screen3 Set the crossover

[Phase] Sets the phase of subwoofer output. The phase is reversed 180 degrees when set to "Reverse".

Sets the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup)

[HPF FREQ] High Pass Filter adjustment. (When front, center or rear speaker is selected on Speaker Select screen)

[LPF FREQ] Low Pass Filter adjustment. (When Subwoofer is selected on Speaker Select screen)

[Slope] Sets a crossover slope.

Car Type (DTA) Setup

You can setup the car type and speaker network, etc.

1Display the Car Type Setup screen

Touch [] > [] > [Audio SETUP] > [Car Type]. (page 59)

2Setup the Car Type

If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects.

1

1Sets up the car type you use together with this unit.

You can choose according to type of your car. "OFF", "Compact", "Full Size Car", "Wagon", "Minivan", "SUV", "Minivan (Long)"

[Location] Sets the locations of the speakers. [Adjust] Displays the Car Type Adjust screen.

You can adjust the digital time alignment that was set automatically when you selected the car type.

74DDX8034BT/DDX8034BTM