Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood DPF-1010, DPF-2010, DPF-3010 Normal play (TRACK mode), Playing tracks in order from track No, 2Place a disc, 1Open the tray, 3Close the tray, The figure shows an example for the DPF-3010

1 24

Download 24 pages, 656.74 Kb

Normal play (TRACK mode)

Use the following procedure to play a CD in the original order of tracks from track No. 1.

12

DPF-3010/2010/1010 (En)

The figure shows an example for the DPF-3010

7	6
4	¢
1	¡

: Keys and control used in the operations described on this page.

Playing tracks in order from track No. 1

1Press the ON/STANDBY switch to ON.

ON/STANDBY

÷Playback starts when a disc has been loaded.

2Load a disc.

1Open the tray.

0

2Place a disc.

Label side

Disc tray

3Close the tray.

0

÷Do not touch the played side of disc.

÷Loading two discs together will cause malfunctioning.

÷Place the disc properly along the groove on the tray. (If the disc is not placed horizontally, malfunction will result.)

÷A single CD (8 cm disc) can also be played.

÷Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be used with this unit.

Lights up.

	TRACK	1	2	3	4	5
	TRACK	SINGLE TIME
	NO.	6	7	8	9	10
	0 1	6	7	8	9	10
	0 1	0 : 00

The track Nos. recorded on the CD are displayed.

3Start playback.

÷After a few seconds, play starts from the track No. 1.

Elapsed time of track being played

PLAY/PAUSE
6	TRACK	1 2 3 4 5
6	TRACK	SINGLE TIME
	NO.	6	7	8	9	10
	0 1	6	7	8	9	10
	0 1	0 : 05
	Track NO. being played
To pause playback	To stop playback
PLAY/PAUSE	TRACK	STOP
6		7

Lights up.

÷Each press pauses and plays the CD alternately.

Contents

Page Introduction Safety precautions Special features Contents Power sources CAUTION – Polarization 12.Accessories Attachment Replacementparts System connections Connection to a general-useamplifier Connection to digital amplifier or MD (only for DPF-3010/2010) This unit is compatible with both [XS8] and [SL16] modes SYSREM CONTROL selector switch Remote Control Automatic Operation (Except [XR] equipment) Synchronized Recording (Except [XR] equipment) Maintenance Controls and indicators Operation of remote control unit (DPF-3010/DPF-2010only) Loading batteries Operation Normal play (TRACK mode) Playing tracks in order from track No Playback from desired track Skipping tracks Searching Time display on CD player (TIME DISPLAY) Programmed play (PGM mode) To check or change the programmed tracks To add a track to the program To clear tracks from the program Repeated playback To repeat the entire disc To cancel repeated playback Editing To check the edited contents Peak search Playback in a random order (Random playback) Timer operations In case of difficulty Play begins as soon as the unit is turned Specifications Compact disc digital audio system Headphone output (Max.)