Maintenance

Disc handling precautions

 

DPF-3010/2010/1010 (En)

Cleaning

9

Label side

Handling

Hold compact discs so that you do not touch the playing surface.

If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner.

Sticker

Playing side

÷Do not attach paper or tape to either

the playing side or the label side of

compact discs.

÷The paste left on the label surface after

a sticker has been peeled off is a factor

which may cause malfunction. If the

surface is sticky due to remaining paste,

be sure to clean it with alcohole before

use.

Storage

When a disc is not to be played for a long period of time, remove it from the CD player and store it in its case.

Sticky paste

Caution on disc used

Never play a cracked or warped disc.

During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent.

Do not use cleaning discs.

Please do not use commercially available cleaning discs, they may damage the internal mechanism.

Discs which can be played with this unit

CD (12 cm, 8 cm), CDV (only the audio part)

÷With CD-G (CD Graphics) discs, this unit can play only the audio.

Cleaning

Note related to transportation and movement

Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth.

Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic components.

CD accessories

The CD accessories (stebilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.

Caution on condensation

Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours with the power left ON, and restart the operation after the condensation has dried up.

Before transporting or moving this unit, carry out the following operations.

1.Turn the power ON but do not load a disc.

2.Verify that the display shown appears.

TRACK

1

2

3

4

5

nod 1

6

7

8

9

10

S C 16

17

18

19

20

 

11

12

13

14

15

3. Wait a few seconds and set the unit to STANDBY mode.

Be specially cautious against condensation in a following circumstance:

When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc.