Kenwood DPF-1010, DPF-2010, DPF-3010 To check or change the programmed tracks, To add a track to the program, To clear tracks from the program, 3 Set the entry, To clear all track

DPF-3010/2010/1010 (En)

Auto space function

During programming of tracks, a non-recorded space of a few secondswillbeautomaticallycreatedbetweentracks. Byrecording 15 tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably.

÷Even when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track numbers.

To check or change the programmed tracks

Lights up.

1Press the CHECK key.

CHECK	Press until the track No. to
	be changed is displayed.

2Select the new track No.

1 2 3

4 5 6

	TRACK		3
PGM	NO.	P.C.	6
	0 6
		P_ 02

÷Perform only step 1 to simply check the program.

÷Each time the key is pressed, the program No. (P-No.) and the track No. on CD are displayed.

÷The previous display resumes in a few seconds.

7	8	9
0		+10

3 Set the entry.	÷Press it while the “P.C.” indicator is lit.
	÷The track being played cannot be changed.
	P.MODE

To add a track to the program

1Select the desired track No.

1 2 3

4 5 6

7 8 9

0+10

2Press the P.MODE key.

÷When a track No. is selected, the track will be added to the end of the existing program.

To clear tracks from the program

Press to clear tracks from the end.

CLEAR

÷Each time the key is pressed, the last track in the program is cleared. ÷The tracks which are programmed earlier than the track being played

cannot be cleared.

To clear all track.

P.MODE

÷Selected tracks can be also completely cleared just by operating the 0 key.

÷The entire program is cleared.