Menu system
In Standby mode
Manual Clock Adjustment1Select Clock Adjustment modePush the Control knob towards up or down. Select the "CLK ADJ" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hoursPush the Control knob towards up or down.
Adjust the minutesPush the Control knob towards right or left.
4Exit Clock adjustment mode Press the [MENU] button.Display Illumination ControlThis function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"DISP ON" | Keeps the display on. |
"DISP OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
⁄
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Ejecting the disc
•Turning off the power
•During function control, such as the Menu System, the display stays on.
In Standby mode
DimmerDimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"DIM AUTO" | The display dims. |
"DIM OFF" | The display doesn’t dim. |
In Standby mode
Switching preoutAlternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)
Display | Setting |
"SWPRE R" | Rear preout. |
"SWPRE SW" | Subwoofer preout. |
In Standby mode
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP ON" | The |
"AMP OFF" | The |
In Audio file source
Supreme SettingWhen AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used.
18 English