General features
Turning the volume down quickly.
Press the [ATT] button.Each time you press the button, the Attenuator turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator blinks.
System QSelecting the best sound setting preset for different types of music.
1Select the source to set Press the [SRC] button.
2Select the Sound type Press the [Q] button.Each time you press the button, the sound setting alternates.
Sound setting | Display |
Natural | "NATURAL" |
User memory | "USER" |
Rock | "ROCK" |
Pops | "POPS" |
Easy | "EASY" |
Top 40 | "TOP40" |
Jazz | "JAZZ" |
⁄
•User memory: The values set on the <Audio Control> (page 6).
•Change each setting value with the <Speaker Setting> (page 8).
First, select the speaker type with the Speaker setting.
1Select the source to adjust Press the [SRC] button.
2Enter Audio Control mode Press the [VOL] knob.3Select the Basic Audio item to adjust Press the [VOL] knob.Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Adjust the Basic Audio item Turn the [VOL] knob.Adjustment Item | Display | Range |
Subwoofer level | "SW L" | |
Bass level* | "BAS L" | |
Middle level* | "MID L" | |
Treble level* | "TRE L" | |
Balance | "BAL" | Left 15 — Right 15 |
Fader | "FAD" | Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
*You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control>(Page 7).
*Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included)
5Exit Audio Control mode Press any button.Press a button other than the [VOL] knob and [ATT] button.
6 English