Connecting Wires to Terminals
⁄To connect the Disc changer, consult your Disc changer manual.
To Kenwood disc changer/ External optional accessory
FM/AM antenna input
Fuse (10A)
Front left output (White)
Wiring harness
Front right output (Red)
Rear left output (White)/ Sub Woofer left output (White)
Rear right output (Red)/ Sub Woofer right output (Red)
(Accessory1)
If no connections are made, do not let the wire come out from the tab.
Power control wire (Blue/White)
P.CONT
Motor antenna control wire (Blue)
ANT. CONT
TEL mute wire (Brown)
MUTE
Dimmer control wire (Orange / White)
ILLUMI
External amplifier control wire (Pink / Black)
EXT.CONT.
White/Black
White
FRONT L
Gray/Black
Gray
FRONT R
Green/Black
Green
REAR L
Purple/Black
Purple
REAR R
When using the optional power amplifier, connect to its power control terminal.
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the
Connect to the terminal that is grounded when either the telephone rings or during conversation.
⁄To connect the Kenwood navigation system, consult your navigation manual.
To car light control switch.
To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.
To front left 
speaker
To front right 
speaker
To rear left 
speaker
To rear right 
speaker
Ignition key
Car fuse box | switch |
Ignition wire (Red) | ACC |
|
Battery wire (Yellow)
Car fuse box
(Main fuse)
Ground wire (Black) - (To car chassis)
–
+
Battery
24 English