Kenwood DPX-MP2100 The messages shown below display your systems condition

The messages shown below display your systems condition.

EJECT:	• No disc magazine has been loaded in
	the changer. The disc magazine is not
	completely loaded.
	• No CD in the unit.
NO DISC:	No disc has been loaded in the disc
	magazine.
TOC ERR:	• No disc has been loaded in the disc
	magazine.
	• The CD is quite dirty. The CD is upside-
	down. The CD is scratched a lot.
E-05:	The disc is unreadable.
BLANK:	Nothing has been recorded on the MD.
NO TRACK:	No tracks are recorded on the MD, although it
	has a title.
E-15:	Media was played that doesn’t have data
	recorded that the unit can play.
NO PANEL:	The faceplate of the slave unit being
	connected to this unit has been removed.
E-77:	The unit is malfunctioning for some reason.
	➪ Press the reset button on the unit. If the
	"E-77" code does not disappear, consult
	your nearest service center.
E-99:	Something is wrong with the disc magazine.
	Or the unit is malfunctioning for some reason.
	➪ Check the disc magazine. And then press
	the reset button on the unit. If the "E-99"
	code does not disappear, consult your
	nearest service center.
HOLD:	The protective circuit in the unit activates
	when the temperature inside the automatic
	disc changer exceeds 60°C (140°F), stopping
	all operation.
	➪ Cool down the unit by opening the
	windows or turning on the air conditioner.
	As the temperature falls below 60°C
	(140°F), the disc will start playing again.

LOAD:	Discs are being exchanged in the Disc
	changer.
READING:	The unit is reading the data on the disc.
IN (Blink):	The CD player section is not operating
	properly.
	➪ Reinsert the CD. If the CD cannot be
	ejected or the display continues to flash
	even when the CD has been properly
	reinserted, please switch off the power
	and consult your nearest service center.
PROTECT:	The speaker wire has a short-circuit or
	touches the chassis of the vehicle, and then
	the protection function is activated.
	➪ Wire or insulate the speaker cable properly
	and press the reset button.
NA FILE:	An Audio file is played with a format that this
	unit can’t support.
	➪ ----
COPY PRO:	A copy-protected file is played.
	➪ ----

English 27