4-4 "SOUND" OSD Operation
This section describes the items which can be controlled with the "SOUND" OSD. (Some items may be uncontrollable depending on the played disc and player status.)
When a VCD or a DVD containing the recording of audio in multiple languages is played, the language used in the voice can be switched over. (The audio language can also be switched directly by pressing the AUDIO button.)
Chapter 4: OSD Operation
When playing a DVD recorded with Dolby Digital Surround audio, powerful sound can be reproduced even when you use only two speakers.
Operation procedure
Chapter 1 Chapter
| 1 Dolby |
|
|
| E |
|
|
|
| T I X | |
SOUND | ENG 5.1ch | Off | Off | Off |
1Audio icon: Shows the audio signal, audio language and audio language No., number of audio channels. Select to switch the audio language.
2Virtual Surround icon: Shows the level of the Vir- tual Surround effect. Select to adjust the level of Vir- tual Surround or switch it off.
3Cinema voice icon: Shows the on/off status of Cin- ema Voice. Select to switch Cinema Voice on or off.
r
Operation procedure
1.Press the ON SCREEN button during DVD playback and select the "SOUND" OSD by pressing the cursor up/down button.
2. Move the cursor to | 1 Dolby | (Audio icon) by |
ENG 5.1ch |
pressing the cursor left/right button, then press the ENTER button.
3.Select the desired audio language number by pressing the cursor up/down button, then press the ENTER button.
÷With a DVD AUDIO disc, an audio language number can be selected.
1 P. PCM
5.1ch 96k 24b
1.Press the ON SCREEN button during DVD playback, and select the "SOUND" OSD by pressing the cursor up/down button.
2.Move the cursor to 
(Virtual Surround icon)
Off
by pressing the cursor left/right button, then press the ENTER button.
÷The icon can be selected only when the played software is recorded in Dolby Digital audio (with 2 or more channels).
3.Select the level of Virtual Surround effect by pressing the cursor up/down button, then press the ENTER button.
5 Chapter 4 Chapter 3 Chapter 2
4Down Mix icon
÷ With a DVD VIDEO disc, an audio language |
number can be selected from up to 8 numbers. |
÷ With VCD, "Stereo", "L", "R" or "L+R" can be |
selected. |
÷ The default audio language set by the user is |
selected when the power is turned on or the disc is |
changed. If the default language is not contained |
in the disc, the priority language defined for the |
Off
1
2
HP1
HP2
The effect is increased when the selected level is higher. Select "Off" to switch the effect Off. To select the level of the Virtual Surround effect through headphones, select "HP VSS1" or "HP VSS2".
Chapter 6 Chapter
disc will be played back. |
Other
Off | The effect is increased when the |
1selected level is higher. Select "Off"
2to switch the effect Off.
8 Chapter 7
43