Kenwood DV-5050M manual 84

Chapter 8 Chapter 7 Chapter 6 Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1

Chapter 7 : Various Setups

Operation procedure

1.While the player is in stop mode, press the SET UP button and press the cursor up, down button to display the "VISUAL" menu of "SET UP MENU".

2.Press the ENTER button to open the setup screen.

		VISUAL
	Player Menu Language		7	English
	Disc Menu Language		7	English
	Audio Language		7	English
	Subtitle Language		7	English
MENU	Still Mode		7	Auto	EXIT
	FL Mode		7	Brightness
	Black Level Setup		7	0 IRE

(DV-5900M)

¶The "NTSC = PAL", "SCART Output Select" and "Black Level Setup" settings are not displayed in certain countries and areas.

3.In the setup menu, select the Function Item (refer to Right Table) by pressing the cursor up or down button and press the ENTER button.

4.Select the Setting Item (refer to Right Table) by pressing the cursor up or down button, then press the ENTER button to enter the selection in memory.

¶"" : Select to return to the previous screen.

Table : SET UP MENU “VISUAL” Function & Setting (3/3)

	Function Item					Setting Item	Initial Position
Icon			Function		Icon	Means	DV-5900M	Other
NTSC = PAL		Switches if the signal from an			On	Select to enable conversion from		Europe and
								U.K. = On
		NTSC	format disc is to	be		NTSC to PAL.
DVF-J6050							–
		converted into PAL or not.						Except for
					Off	Select to disable conversion from
								Europe and
						NTSC to PAL.
								U.K. = Off
SCART Output		Switches the output signals from			Composite	Composite video signal.
Select		the TV SCART connector.
(U.K. and					S	S Video signals.	–	Composite
Europe only)
					RGB	RGB signals.
Black Level		This	function makes	the	7.5 IRE	Standard black level.
Setup		adjustment of the black level. Set
		to your preference and monitor's
							7.5 IRE	–
DV-5900M						Expanded black level.
		ability.			0 IRE
DV-5050M

84