SIRIUS features
SRC | FM | AUDIO/ 4/ ¢ SCROLL |
OPEN |
|
|
|
| c.s. |
AUTO | 1 - 6 | 38 |
|
Preset channel number
ST TI DAB NEWS MP3 WMA
ATT DIGITAL ANALOG RDS PTY M P S
Band display | Channel display |
Preset Tuning
Calling up the channels in the memory.
1Select the band Press the [FM] button.
2Call up the channel
Press the desired [1] — [6] button.
Channel Scan
Every receivable Channel is checked for 10 seconds.
1Start Channel Scan
Press the [AUTO] button for at least 1 second. The channel number display blinks.
2Release it when the song you want to listen to is received
Press the [AUTO] button for at least 1 second.
Switching Seek Mode
Channel Skip/ Lock function
You can Skip and Lock unwanted channels while tuning and prohibit access particular channels.
Channel Skip:
With hundreds over of Channel available, you may wish to limit the accessible listed only those you like.
Channel Lock:
You can LOCK particular channels so that can be accessed only with Lock Code (4 digit code) that you define. Channel Lock function useful for preventing their children access to specific content.
•You can choose the skip and lock channels with <Preset Tuning> (page 21) and <Direct Access Tuning> (page 22).
•Refer to <SIRIUS Channel Skip/ Lock Setting> (page31) and <SIRIUS Lock Code Setting> (page32).
Listen to Channel Lock content
When you choose the Lock Channels directory with <Preset Tuning> (page 21) or <Direct Access Tuning> (page 22). When you choose Lock
Selecting SIRIUS source
Selecting SIRIUS source
Press the [SRC] button.
Select the "SIRIUS" display.
•You need to subscribe to SIRIUS receive the service by SIRIUS Satellite Radio. Consult SIRIUS if "CALL
•It may take a little time to start receiving after you selected the SIRIUS source.
•If you cannot receive any signal in the input Channel due to a bad condition on radio wave or another problem, "Acquiring Signal" appears.
Selecting the Preset Band
Press the [FM] button.
Each time the button is pressed the preset band switches between the SR1, SR2, SR3 and SR4.
Tuning
Selecting the channel.
Turn the [4] / [¢] knob.
Channel Preset Memory
Putting the channels in the memory.
1Select the band Press the [FM] button.
2Select the channel to put in the memory Turn the [4] / [¢] knob.
3Put the channel in the memory
Press the desired [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time. On each band, 1 channel can be put in the memory on each [1] — [6] button.
Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as shown below.
Display | Operation |
"Channel" | Normal manual seeking control. |
"Preset" | Search in order of the channels in the Preset |
| memory. |
Channel, "CODE
can listen the channel when input Lock Code (4 digit) is correctly.
1Select the digits to enter Press the [AUDIO] knob.
•This function can be used the [FM] / [AM] button.
2Select the Lock Code numbers Turn the [4] / [¢] knob.
3Repeat steps 1 and 2, and complete the Lock Code.
4Confirm the Lock Code
Press the [AUDIO] knob for at least 1 second. "APPROVED" is displayed.
•When the wrong code is entered, this function is canceled.
20 English | English 21 |
