Function of the Ez700SR
Tuner features
Function of the Ez700SR
HD Radio control features
Function of remote
Direct Access Tuning
Entering the frequency and tuning.
1 | Select the band |
| Press the [FM] / [AM] button. |
2 | Enter Direct Access Tuning mode |
| Press the [DIRECT] button on the remote. |
| "– – – |
3 | Enter the frequency |
Auto Memory Entry
Putting stations with good reception in the memory automatically.
1Select the band for Auto Memory Entry Press the [FM] / [AM] button.
2Open Auto Memory Entry
Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.
OPEN
SRC | AM | FM |
4/ ¢
c.s.
Press the number buttons on the remote. |
Example: |
Desired frequency | Press button |
92.1 MHz (FM) | [0], [9], [2], [1] |
810 kHz (AM) | [0], [8], [1], [0] |
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
•If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled.
Preset Tuning
Calling up the stations in the memory.
1Select the band
Press the [FM] / [AM] button.
2Call up the station
Press the desired [1] — [6] button.
AUTO/AME |
| 1 - 6 |
|
|
|
| |
ST indicator |
|
|
| Preset station number | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ST | TI | DAB | NEWS | MP3 | WMA | ||
ATT | DIGITAL | ANALOG | RDS | PTY M P S | |||
Band display |
| Frequency display |
|
| |||
Station Preset Memory
Putting the station in the memory.
1Select the band
Press the [FM] / [AM] button.
2Select the frequency to put in the memory Turn the [4] / [¢] knob.
3Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button.
NOTE
With the HD Radio tuner, you can use the similar functions to <Tuning Mode>, <Station Preset Memory>, <Auto Memory Entry>, and <Preset Tuning> of Tuner features. Refer to Tuner features (page 15,16) for how to use the functions.
Tuning
Selecting the station.
1Select HD Radio source Press the [SRC] button. Select the "HD Radio" display.
2Select the band Press the [FM] button.
Each time the [FM] button is pressed it switches between the HF1, HF2, and HF3 bands.
When the [AM] button is pressed, it switches HA band.
3Tune up or down band Turn the [4] / [¢] knob.
•When you connect an HD Radio, Tuner features of the unit are disabled and switched to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change.
•During reception of stereo stations the "ST" indicator is ON.
•The setting of the CRSC is always ON. Switching to OFF is not possible.
•Using <Receive mode Setting> (page 30) the modes can be switched to digital broadcast automatic switching, analog broadcast only, or digital broadcast only.
•When "Digital" has been set with <Receive mode Setting> (page 30), the seek time will be longer to allow a check of whether the transmission is a digital broadcast.
16 English | English 17 |
