Menu system
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the main unit.
Display | Setting |
"AMP Bass FLT" | Bass boost level is flat. |
"AMP Bass +6" | Bass boost level is low (+6dB). |
"AMP Bass +12" | Bass boost level is mid (+12dB). |
"AMP Bass +18" | Bass boost level is high (+18dB). |
•Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.
•For amplifiers there are the model that can be set from Flat to +18 dB, and the model that can be set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the unit, "AMP Bass +18" won’t work correctly even if it’s selected.
B.M.S. Frequency Offset
Setting the central frequency boosted by B.M.S.
Display | Setting |
"AMP Freq NML" | Boost with the normal central frequency. |
"AMP Freq Low" | Drop the normal central frequency 20%. |
In HD Radio mode
Receive mode Setting
Sets the receive mode.
1Select the Receive mode Press the [AUDIO] knob.
Select the "Receive Mode" display.
• This function can be used the [FM] / [AM] button.
2Enter Receive mode Press the [MENU] button.
3Set the Receive mode Press the [AUDIO] knob.
Each time the knob is pressed the Receive mode switches as shown below.
Receive mode | Display | Operation |
Auto mode | "Auto" | Analog broadcasts and digital |
|
| broadcasts will be switched |
|
| automatically. |
|
| When both are being transmitted, |
|
| the digital broadcast will have |
|
| priority. |
Digital | "Digital" | Digital broadcasts only. |
Analog | "Analog" | Analog broadcasts only. |
• This function can be used the [FM] / [AM] button.
4Exit Receive mode
Press the [MENU] button.
•Even if the "Auto" setting, an analog broadcast will be received during the reception of a ball game mode
In FM reception (Ez700SR)
In HD Radio (FM) mode (Ez900HDS)
CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to mono to reduce
Display | Setting |
"CRSC ON" | The CRSC is ON. |
"CRSC OFF" | The CRSC is OFF. |
•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
In SIRIUS source
SIRIUS ID (ESN) display
Displaying the SIRIUS ID (Electronic Serial Number) display.
Display
"ESN = ************"
•Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial number and the electronic SIRIUS Identification number for service activation and potential future service changes.
In SIRIUS source
SIRIUS Channel Skip/ Lock Setting
You can Skip and Lock unwanted channels while tuning and prohibit access to the particular channels. (Channel Lock function without channel number 184)
1Select Channel Skip/ Lock mode Press the [AUDIO] button.
Select the "Skip/ Lock" display.
•This function can be used the [FM] / [AM] button.
2Enter Channel Skip/ Lock mode Press the [MENU] button.
"CH- *** - - " is displayed.
3Select the channels
Turn the [4] / [¢] knob.
4Set the item (Channel Skip or Lock) For Channel Skip:
Press the [AUDIO] knob.
When it's ON, "CH- *** S - " is displayed. Each time the [AUDIO] knob is pressed, the Channel Skip switches ON or OFF.
For Channel Lock:
Press the [AUDIO] knob for at least 1 second. When it’s ON, "CH- *** S L " is displayed.
•Channel Skip is automatically set in the unit when you set the Channel Lock function.
5Exit Channel Skip/ Lock mode Press the [MENU] button.
Canceling the Channel Lock mode
1Select Channel Skip/ Lock mode Press the [AUDIO] button.
Select the "Skip/ Lock" display.
•This function can be used the [FM] / [AM] button.
2Enter Channel Skip/ Lock mode Press the [MENU] button.
"CH- *** - - " is displayed.
3Select the channels
Turn the [4] / [¢] knob.
4Cancel for Lock mode
Press the [AUDIO] knob for at least 1 second. "CODE
5Select the digits to enter Press the [AUDIO] knob.
•This function can be used the [FM] / [AM] button.
6Select the Lock Code numbers Turn the [4] / [¢] knob.
7Repeat steps 5 and 6, and complete the Lock Code.
8Confirm the Lock Code
Press the [AUDIO] knob for at least 1 second. "APPROVED" is displayed.
9Exit Channel Skip/ Lock mode Press the [MENU] button.
30 English | English 31 |
