centrifugal juicer (if supplied)
Use the centrifugal juice for making juice from firm fruit and vegetables.
pusher
lid
strainer
inner bowl
to use the centrifugal juicer
1Fit the drive shaft and bowl onto the power unit.
2Lock the strainer into the inner bowl 
.
3Fit the inner bowl into the processor bowl 
.
4Place the attachment lid onto the bowl, turn until it locks and the feed tube sits over the handle 
.
5Cut the food into small pieces to fit the feed tube.
6Switch on and push down evenly with the pusher - never put your fingers in the feed tube. Process fully before adding more.
7After adding the last piece, let the machine run for a further 20 seconds to extract all the juice from the strainer.
important
●If the processor vibrates, switch off and empty the strainer (The processor vibrates if the pulp becomes unevenly distributed).
●Process small amounts at a time (450g maximum) and empty the strainer and inner bowl regularly.
●Before processing remove stones and pips (eg pepper, melon, plum) and tough skins (eg melon, pineapple). You don’t need to peel or core apples and pears.
hints
●Use firm, fresh fruit and vegetables.
●Citrus juice will be bitter and frothy because its peel and pith get processed too. Use the citrus juicer instead.
KENSTORE™ attachments carousel (if supplied)
Your food processor is supplied with an attachment storage carousel that fits inside the bowl.
to use the storage carousel
1Fit the knife blade to the bowl.
2Then fit the whisk, discs and canopy into the carousel 
.
3Fit the carousel over the knife blade and place the processor lid on top 
.
care & cleaning
●Always switch off and unplug before cleaning.
●Handle the blades and cutting discs with care - they are extremely sharp.
●Some foods may discolour the plastic. This is perfectly normal and won’t harm the plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discolouration.
power unit
●Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
●Store excess cord in the storage area at the back of the machine 
.
liquidiser and mini chopper/mill
1Empty the jug/jar before unscrewing it from the blade unit.
2Wash the jug/jar by hand.
3Remove and wash the seals.
4Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water.
5Leave to dry upside down.
twin beater geared whisk
●Detach the beaters from the drive head by gently pulling them free. Wash in warm soapy water.
●Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water. all other parts
●Wash by hand, then dry.
●Alternatively they can be washed on the top rack of your dishwasher. A short low temperature programme is recommended.
service & customer care
●If the cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer.
●If you experience any problems with the operation of the processor, before calling for assistance refer to the troubleshooting guide.
UK
If you need help with:
●Using your appliance
●Servicing or repairs (in or out of guarantee)
call Kenwood on 023 92392333 and ask for customer care.
Have your model number ready - it’s on the underside of the appliance.
●spares and attachments
call 0844 557 3653.
other countries
Contact the shop where you brought the appliance.
●Designed and engineered by Kenwood in the UK.
●Made in China.
7
