metal centrifugal juicer
Use the centrifugal juicer for making juice from firm fruit and vegetables.
pusher centrifugal lid pulp remover filter drum juicer drive shaft
to use the centrifugal juicer
1 | Fit the juicer drive shaft and bowl onto the power unit. | |||
2 | Place the pulp remover | into the filter drum - ensuring | ||
| the tabs locate with the slots in the bottom of the drum |
| . | |
|
| |||
3 | Fit the filter drum . |
|
|
|
4 | Place the attachment lid | onto the bowl and turn until it | ||
| locks . Your juicer will not operate if the bowl or | |||
| lid are not fitted correctly into the interlock . | |||
5Place a suitable glass or jug under the juice outlet.
6 Cut the food to fit the feed tube.
7 Switch on and push down evenly with the pusher - never put your fingers in the feed tube. Process fully before adding more.
● After adding the last piece, let the juicer run for a further 30 seconds to extract all the juice from the filter drum.
safety
●Do not use the juicer if the filter is damaged.
●The cutting blades on the base of the filter drum are very sharp, take care when handling and cleaning the drum.
●Only use the pusher supplied. Never put your fingers in the feed tube. Unplug before unblocking the feed tube.
●Before removing the lid, switch off and wait for the filter to stop.
important
●If the juicer starts to vibrate, switch off and empty the pulp from the drum. (The juicer vibrates if the pulp becomes unevenly distributed).
●Maximum capacity that can be processed at one time is 500g of fruit or vegetables.
●Some very hard foods may make your juicer slow down or stop. If this happens switch off and unblock the filter.
●Switch off and clear the pulp collector regularly during use. hints
●Before processing remove stones and pips (eg pepper, melon, plum) and tough skins (eg melon, pineapple). You don’t need to peel or core apples and pears.
●Use firm, fresh fruit and vegetables.
●Citrus fruit - peel and remove the white pith, otherwise the juice may taste bitter. For best results use the citrus juicer.
KENSTORE™ attachments carousel
Your food processor is supplied with an attachment storage carousel that fits inside the bowl.
to use the storage carousel
1 | Fit the knife blade to the bowl. |
2 | Then fit the whisk, discs and canopy into the carousel . |
3Fit the carousel over the knife blade and place the processor
lid on top 
.
care & cleaning
●Always switch off and unplug before cleaning.
●Handle the blades and cutting discs with care - they are extremely sharp.
●Some foods may discolour the plastic. This is perfectly normal and won’t harm the plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discolouration.
power unit
●Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
●Store excess cord in the storage area at the back of the
power unit 
.
liquidiser/mini chopper/mill
1Empty the goblet/jar before unscrewing it from the blade unit.
2Wash the goblet/jar by hand.
3 Remove and wash the seals.
4 Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
●Detach the beaters from the drive head by gently pulling them free. Wash in warm soapy water.
●Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water. centrifugal filter drum
●Lift out the pulp remover and tap lightly to release the pulp.
●Clean using a soft brush.
●Check the filter regularly for signs of damage. Do not use if the filter is damaged. Refer to “service and customer care”.
6
