Care and cleaning, Ptfe soleplate model IC800 only

When using the steam function, the green ready to steam indicator light will go off.

●It is possible to vary the amount of steam produced. Move the variable steam control to the right for

maximum steam and to the left for minimum steam.

6The red low water indicator light will glow continuously when the water tank becomes empty. This will be accompanied by a continuous humming noise of the pump. Should this occur we recommend you switch off the steam station. Remove the water tank and refill.

Note: For prolonged use always ensure there is water in the water tank.

hints

●Wool and velvet. Guide the iron 2 cm above the fabric, depressing the steam button. The power of steam smoothes away creases and revitalises the fabric. Do not pull the fabric.

●Vertical ironing – suits, dresses and curtains are smoothed, renewed and put into shape again while they are hanging (see below).

PTFE soleplate (model IC800 only)

The soleplate can be fitted when ironing delicate items such as silk. Follow the instructions given on the packaging and keep them handy for future use. Always take care when fitting, particularly if the iron is hot.

If the soleplate (Kenwood model ICSP01) is not included in pack it can be purchased separately from the shop where you purchased your steam station.

steaming the creases out of curtains, hanging clothes, wall hangings

1Make sure there is water in the tank.

2Turn the temperature control to

3When the green ready to steam light glows pull the material slightly with one hand: hold the iron upright with the other.

4Tilt the iron forwards, then move it down the material, pressing the steam button.

●Never steam clothes being worn. Keep your hands away from the steam and soleplate.

●Always ensure that the iron is facing away from the user and/or others when vertical steaming.

●For material other than linen or cotton, keep the iron off the material to avoid burning it.