3 seconds.
When
8Do the step 4 through 7 operation, and reenter the Security Code.
“APPROVED” is displayed.
The Security Code function activates.
⁄
•If you enter the wrong Code in steps 4 through 6, repeat from step 4.
9Exit Security Code mode Press the [B.BOOST] button.
Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed
1Turn the power ON.
2Do the step 4 through 7 operation, and enter the Security Code.
“APPROVED” is displayed. Now, you can use the unit.
⁄
•When the Security Code function is activated, “CODE SET” changes to “CODE CLR”.
•To deactivate the Security Code function, see the next section <Deactivating Security Code>.
Function of
Deactivating Security Code
To deactivate the Security Code function.
1Select Security Code mode
Press the top or bottom side of the Control knob.
Select the “CODE CLR” display.
2Enter Security Code mode
Press the center of the Control knob for at least 1 second.
When “ENTER” is displayed, “CODE CLR” is also displayed.
3Select the digits to enter
Press the right or left side of the Control knob.
4Select the Security Code numbers
Press the top or bottom side of the Control knob.
5Repeat steps 3 and 4, and complete the Security Code.
6Press the center of the Control knob for at least 3 seconds.
“CLEAR” is displayed.
The Security Code function deactivates.
7Exit Security Code mode Press the [B.BOOST] button.
⁄
•If a wrong security code is entered, “ERROR” is displayed. Enter a correct security code.
Manual Clock Adjustment
1Select Clock Adjustment mode
Press the top or bottom side of the Control knob.
Select the “CLK ADJ”/ “CLCK” display.
2Enter Clock Adjust mode
Press the center of the Control knob for at least 1 second.
The clock display blinks.
3Adjust the hours
Press the top or bottom side of the Control knob.
Adjust the minutes
Press the right or left side of the Control knob.
4Exit Clock adjustment mode Press the [B.BOOST] button.
English 11