Menu system

In Standby mode

Manual Clock Adjustment

⁄

•You can do this adjustment when the <Synchronize Clock> (page 18) is set as OFF.

1Select Clock Adjustment modePush the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutes

Push the Control knob towards [4] or [¢].

4Exit Clock adjustment mode Press the [MENU] button.

In Standby mode

Synchronize Clock

Synchronizing the RDS station time data and this unit’s clock.

Display

Setting

"SYNC ON"

Synchronizes the time.

"SYNC OFF"

Adjust the time manually.

⁄

• It takes 3 to 4 minutes to synchronize the clock.

In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.

Display

Setting

"DSI ON"

LED flashes.

"DSI OFF"

LED OFF.

Dimmer

You can lower the brightness of the display by using the dimmer function.

Display

Setting

"DIM ON"

The display dims.

"DIM OFF"

The display doesn’t dim.

News Bulletin with Timeout Setting

The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited.

Display and Setting

"NEWS OFF"

"NEWS 00M"

…

"NEWS 90M"

When you set "NEWS 00M" — "NEWS 90M", the News Bulletin Interrupt function is ON.

When the News Bulletin is ON, the "NEWS" indicator is ON.

When the news bulletin starts, "NEWS" is displayed, and the tuner changes to the news bulletin.

⁄

• If you choose the "20MIN" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received.

• The news bulletin volume is the same level that was set for <Traffic Information> (page 12).

• This news bulletin function is only available if the desired station sends PTY-code for news bulletin or belongs to <Enhanced Other Network>-Network sending PTY-code for news bulletin.

• When the News Bulletin Interrupt function is ON, the tuner changes to an FM station.

18 English