Kenwood KDC-237 Attenuator, Audio Control, Audio Setup, Bass Boost, Range, Range, Display, Display, Setting, Display, ⁄About System Q, Press the [ATT] button

Turning the volume down quickly.

Press the [ATT] button.

Each time you press the button, the Attenuator turns ON and OFF.

When the Attenuator is ON, the "ATT" indicator blinks.

1Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the [VOL] knob.3Select the Audio item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Adjust the Audio item Turn the [VOL] knob.

Exit Audio Control mode (Volume control mode)

⁄About System Q

•You can recall the best sound setting preset for different types of music.

•Change each setting value with the <Speaker Setting> (page 8). First, select the speaker type with the Speaker setting.

•"USER": This appears when Bass level, Middle level,

and Treble level are adjusted. When "USER" is selected, these levels are recalled.

5Exit Audio Control mode Press any button.

Press a button other than the [VOL] knob and [ATT] button.

Setting the Sound system, such as Volume offset.

1Select the source to adjust Press the [SRC] button.

2Enter Audio Setup modePress the [VOL] knob for at least 1 second.3Adjust the Audio setup item Turn the [VOL] knob.

Adjustment Item	Display	Range
Volume offset	"V-OFF"	–8 — ±0 (AUX : –8 — +8)

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

4Exit Audio Setup mode

Press the [VOL] knob for at least 1 second.

Bass sound can be enhanced by one-touch operation.

Press the [B.BOOST] button.

When you press the button once, the current Bass Boost setting is displayed.

Each time you press the button, the Bass Boost setting alternates.

English 7