Kenwood KDC-237 Auxiliary Input Display Setting, Built-inAuxiliary input Setting, Power OFF Timer, Demonstration mode Setting, Display, Setting, Display, Setting, Display

Menu system

Auxiliary Input Display Setting

Selecting the display when alternating to Auxiliary input source.

1Select Auxiliary input source Press the [SRC] button. Select the "AUX" display.

2Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

3Select Auxiliary input display setting mode Push the Control knob towards [FM] or [AM]. Select the "NAME SET" display.

4Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The selected Auxiliary input display is displayed.

5Select the Auxiliary input display

Push the Control knob towards [4] or [¢]. Each time you push the knob, the display alternates as listed below.

•"AUX"

•"DVD"

•"PORTABLE"

•"GAME"

•"VIDEO"

•"TV"

6Exit Auxiliary input display setting mode Press the [MENU] button.

⁄

•When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.

In Standby mode

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.

Display	Setting
"AUX OFF"	When selecting the source there’s no Auxiliary Input.
"AUX ON1"	When selecting the source there’s Auxiliary Input.
"AUX ON2"	When the unit is turned on by AUX source, the attenuator
	function is activated. Press [ATT] button to cancel the
	attenuator function in order to listen to the external
	equipment.

⁄

•Setting to "AUX ON2" will not output the noise which is produced when an external equipment is not connected to the AUX terminal.

In Standby mode

Power OFF Timer

Setting the timer to turn this unit’s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’s battery power.

Display	Setting
"OFF – – –"	Power OFF Timer function is OFF.
"OFF 20M"	Turns the power OFF after 20 minutes.
(Original setting)
"OFF 40M"	Turns the power OFF after 40 minutes.
"OFF 60M"	Turns the power OFF after 60 minutes.

In Standby mode

Demonstration mode Setting

Sets the demonstration mode.

1Select the Demonstration modePush the Control knob towards [FM] or [AM]. Select the "DEMO" display.2Set the Demonstration mode

Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below.

Display	Setting
"DEMO ON"	The Demonstration mode function is ON.
"DEMO OFF"	Exit Demonstration mode (Normal mode).

20 English