General features

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type.

1Enter Standby

Press the [SRC] button. Select the "STANDBY" display.

2Enter Speaker Setting mode Press the [VOL] knob.3Select the Speaker type Turn the [VOL] knob.

Each time you turn the knob, the setting alternates between the settings shown in the table below.

Speaker type

Display

OFF

 

"SP OFF"

For 5

& 4 in. speaker

"SP 5/4"

For 6

& 6x9 in. speaker

"SP 6*9/6"

For the OEM speaker

"SP OEM"

4Exit Speaker Setting mode Press the [VOL] knob.

Switching Display

Changing the information displayed.

1Enter Switching Display modePress the Control knob for at least 1 second. "DISP SEL" is displayed.2Select the Display itemPush the Control knob towards [4] or [¢].In Tuner source
Information

Display

Frequency (MW, LW)

"FREQ"

Program Service name (FM)

"FREQ/PS"

Clock

"CLOCK"

In CD source

Information

Display

Play time & Track number

"P-TIME"

Clock

"CLOCK"

In Standby/ Auxiliary input source

Information

Display

Source name

"SRC NAME"

Clock

"CLOCK"

3Exit Switching Display mode Press the Control knob.

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you, helping to deter theft.

Removing the FaceplatePress the Release button.

The faceplate unlocks, allowing you to detach it.

¤

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

•Keep the faceplate in its faceplate case while detached.

•Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Reattaching the Faceplate1Align the projections on the unit with the grooves on the faceplate.

Projections

Grooves

2Push the faceplate in until it clicks.

The faceplate is locked in place, allowing you to use the unit.

8 English