Kenwood Troubleshooting, Item, Symptom, [SETTINGS], Remedy/Cause, Selectable setting (Preset: *)

[SETTINGS]

Item		Selectable setting (Preset: *)
AUX NAME	AUX*/ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component. (Selectable
	only if “AUX” is selected as the source.)
CLOCK	CLOCK ADJ:	(For details, refer page 6.)
	TIME SYNC:	ON*: Synchronizes the RDS station time data and the unit's clock. ; OFF: Cancels.
DISPLAY	DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels.
	TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF:
		Cancels. (Preset: KDC-MP249/ KDC-MP2049/ KDC-MP149: AUTO ; KDC-3051M/ KDC-315M:
		OFF)
RDS SET	NEWS SET/ AF SET/ RDS REG/ ATP SEEK: Selectable only if any source other than tuner source is selected. (For
	details, refer page 8.)

[TIME SYNC/ RDS SET] is selectable only with KDC-3051M/ KDC-315M.

Troubleshooting

Symptom	Remedy/Cause
Sound cannot be heard.	Adjust the volume to the optimum level. / Check the cords and connections.
“PROTECT” appears and no	Check to be sure the terminals of the speaker leads are covered with insulating tape
operations can be done.	properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest
	service center.
The unit does not work at all.	Reset the unit.
[P-OFF WAIT] does not work.	Exit from the demonstration mode. (page 6)
Radio reception is poor. / Static noise	Connect the antenna firmly. / Pull the antenna out all the way.
while listening to the radio.
“IN” flashes.	The CD player is not operating properly. Reinsert the disc properly. If the condition did
	not improve, turn off the unit and consult your nearest service center.
CD-R/CD-RW cannot be played back	Insert a finalized CD-R/CD-RW (finalize with the component which you used for
and tracks cannot be skipped.	recording).
Disc sound is sometimes interrupted.	Stop playback while driving on rough roads. / Change the disc. / Check the cords and
	connections.
“NA FILE” appears.	The unit is playing an unsupported audio file.
“NO DISC” appears.	Insert a playable disc into the loading slot.
“TOC ERROR” appears.	The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another
	disc instead.
“ERROR 99” appears.	The unit is malfunctioning for some reason. Press the reset button on the unit. If the
	“ERROR 99” code does not disappear, consult your nearest service center.
“COPY PRO” appears.	A copy-protected file is played.
Noise is generated.	Skip to another track or change the disc.
Tracks cannot play back as you have	Playback order is determined when files are recorded.
intended them to play.
“READING” keeps flashing.	Longer readout time is required. Do not use too many hierarchies and folders.
Elapsed playing time is not correct.	This is caused by how the tracks are recorded.
Correct characters are not displayed	This unit can only display letters (upper case), numbers, and a limited number of
(e.g. album name).	symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is set
	to [ON]. (page 6)

12