ISO connectors
Pin |
| Color and function | ||
A4 | Yellow |
| Battery |
|
A5 | Blue/White |
| Power control | |
A7 | Red |
| Ignition (ACC) | |
A8 | Black |
| Earth (ground) connection | |
B1 / B2 | Purple ª / Purple/black · | Rear speaker (right) | ||
B3 / B4 | Gray ª / Gray/black · | Front speaker (right) | ||
B5 / B6 | White ª / White/black · | Front speaker (left) | ||
B7 / B8 | Green ª / Green/black · | Rear speaker (left) | ||
Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as illustrated below.
Ignition wire |
|
|
(Red) | A7 | (Red) |
Unit |
| Vehicle |
Battery wire | A4 | (Yellow) |
(Yellow) | Default wiring | |
| ||
ENGLISH
Installing the unit
1 | Connect the wiring harness to the unit. Other wiring |
| connection has been completed earlier. (page 14) |
2 | Dashboard of your car |
Before attaching, make sure |
the direction of the
escutcheon is correct. (Wider | Bend the appropriate tabs |
hooks on the top side.) | to hold the mounting |
sleeve firmly in place.
Installing without using the mounting sleeve (Japanese car)
1Remove the mounting sleeve and escutcheon from the unit.
2Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with the supplied screws.
T: Toyota cars
N: Nissan cars
Removing the unit
1Detach the faceplate.
2Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out.
3Insert the removal tools deeply into the slots on each side, then follow the arrows instructions as shown below.
15