Getting started
Canceling the display demonstration
The display demonstration is always turned on unless you cancel it.
When you turn on the power (or after you reset the unit), the display shows:
[CANCEL DEMO] \ [PRESS] \
[VOLUME KNOB]
1Press the volume knob.
[YES] is selected as the initial setup.
2Press the volume knob again to confirm. [DEMO OFF] appears.
If no operation is done for about
15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts.
Adjusting the clock
1Press the volume knob to enter [FUNCTION] mode.
2Turn the volume knob to select [SETTINGS], then press to enter.
3Turn the volume knob to select [CLOCK], then press to enter.
4Press the volume knob to select [CLOCK ADJ], then press to enter. Clock hour flashes on the display.
5Turn the volume knob to adjust the hour, then press to enter the minute adjustment.
Clock minutes flashes on the display.
6Turn the volume knob to adjust the minute, then press to confirm.
Press 4 / ¢ to move between the hour and minute adjustment.
7Hold to finish the procedure.
Setting the demonstration mode
1Press the volume knob to enter [FUNCTION].
2Turn the volume knob to select [DEMO MODE], then press to enter.
3Turn the volume knob to select [ON] or
[OFF].
If [ON] is selected, display demonstration starts if no operation is done for about 20 seconds.
4Hold to finish the procedure.
Initial settings before operations
1Press SRC to enter [STANDBY] mode.
2 Press the volume knob to enter [FUNCTION] mode.
3 Turn the volume knob to select [INITIAL SET], then press to enter.
4 Turn the volume knob to make a selection, then press to confirm. See table below for selection.
5 Hold to finish the procedure.
Item | Selectable setting (Preset: *) |
PRESET TYPE NORM*: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2).; MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2).
KEY BEEP | ON*/ OFF: Activates/deactivates the keypress tone. |
TDF ALARM | ON: Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ; OFF*: Cancels |
RUSSIAN | ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ; |
SET | OFF*: Cancels. |
Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery. | |
|
[TDF ALARM] is selectable only with
6