received.
Direct Access Tuning | (Function of remote) |
When you know the frequency of the station that you want to listen to, you can input it directly for quick access.
1Select the band by pressing the FM or AM button.
2Press the DIRECT button.
If you make no input in the
3Enter the frequency of the desired station.
If you want to listen to an FM station at 92.1 MHz, for example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example, press 0, 8, 1, and 0.
NOTE
•You cannot enter frequencies above or below what a band can receive.
•FM frequencies can only be input in 0.1 MHz steps, and not 0.01 MHz steps.
Canceling Direct Access Tuning:
Press the DIRECT button again.
Recalling a Preset Station:
Press the preset station button
NOTE
You can store six stations in each of the FM1, FM2, FM3, and AM bands.
Auto Memory Entry
You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way.
1Select the band for auto memory entry.
2Press the AME button for at least two seconds to start auto memory entry.
The numbers of the preset station buttons are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.
Recalling a Preset Station:
Press the preset station button
Station Preset Memory
Store the frequency of a station. You can then recall that station with a single touch of a button.
1Select the band/station that you want to have stored.
2Press the button
The button number blinks once in the display to indicate that the data has been stored.
—17 —
