Menu settings
English
Function of the KDC-V6017
Variable Illumination Color Setting
You can set the display to a desired color.
Display and setting:
1Select the display "Color" during the selecting function in the menu mode.
2To set a color manually:
Hold down on the 4 or ¢ button.
Pressing the ¢ button advances the color, and pressing the 4 button reverses it.
When the desirable color appears, release the button.
3To make the popular colors appear:
Press the preset button
#1: White
#2: Red
#3: Blue
#4: Blue Green
4To switch colors depending on the situation: (Situational Mode)
Each time you press the #6 button, the mode switches as follows:
▼
Scan Mode
▼
SRC Mode
(Changing colors depending on the source being played)
▼
Time Mode
(Color changes every six hours)
▼
Situational Mode off
When Situational Mode is off, the original color setting resumes.
5To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for at least two seconds to enter the
blue adjust mode.
The 4 and ¢ buttons are used to adjust the blue color tones, respectively.
Press the #3 button to end the blue adjust mode.
6To store the color setting in the memory: (color preset memory)
After adjusting the illumination colors, press the #5 button for two seconds to store the color setting in the memory. Pressing the #5 button again recalls the stored colors from the memory.
NOTE
The Blue Adjust mode setting cannot be stored in memory.
7Press the MENU button to end the Variable Illumination Color Setting mode.
Contrast Adjustment
This adjustment permits easy viewing of the display.
Display and setting: "Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5".
Dimmer
You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
— 30 —
