Kenwood KDC-57MR, KDC-516S, KDC-V6017, KDC-X617 Installation, Installing in Japanese-MadeCars

Installation

■Installation

Firewall or metal support

Accessory6

■Installing in Japanese-Made Cars

1Refer to the section “Removing the hard rubber frame (P. 38)” and then remove the hard rubber frame.

2Mount the J-Car trim plate with the thick part at the bottom.

3Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws.

Bend the tabs of the mounting sleeve with

a screwdriver or

T	N
N	T	T/N

6 mm	6 mm
MAX.	MAX.
M5mm 4	M5mm 5

Self-tapping	Accessory2
screw	Metal mounting
(commercially	strap
available)
NOTE

similar utensil and attach it in place.

T: Toyota cars	Accessory4...for Nissan car
N: Nissan cars
	Accessory5 ...for Toyota car

Accessory8 J-Car Trim Plate (place thick part on bottom)

Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

2CAUTION

•During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit.

•Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.

— 37 —