Kenwood KDC-BT30, KDC-BT40U Clock Adjustment, Demonstration Mode Setting, Initial Setting, Display, Overview, 5Adjusting Clock, Select “DEMO MODE”, Select “ON” or “OFF”

Other Functions

Release button [SRC] [VOL]

[]

Clock Adjustment

1Turn on this unit. Press the [SRC] button.

2Enter Function Setting mode

Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed.

3Cancelling “TIME SYNC” mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “SETTINGS” > “CLOCK” > “TIME SYNC”.

Turn the [VOL] knob to select “OFF”, and then press the [VOL] knob.

Display	Overview
“CLOCK ADJUST”	Sets the clock. You can do this adjustment when
	“TIME SYNC” is set to “OFF”.
“TIME SYNC”	Synchronizing the RDS station time data and this
	unit’s clock.
	OFF/ON

(Factory setting: Underlined)

4Enter Clock adjustment mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “SETTINGS” > “CLOCK” > “CLOCK ADJUST” (“CLOCK ADJ”).

The hour display blinks

5Adjusting Clock

Turn the [VOL] knob to set the hours and press it when to finish the hour adjusting.

The minute display blinks.

Turn the [VOL] knob to set the minutes and press it when to finish the minute adjusting.

6Exit Function Setting mode

Press the [] button for at least 1 second.

Demonstration Mode Setting

Turning the demonstration mode ON/OFF.

1Enter Function Setting mode

Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed.

2Select Demonstration mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “DEMO MODE”.

3Set the Demonstration mode

Turn the [VOL] knob and press it when the desired item is displayed.

Select “ON” or “OFF”.

4Exit Function Setting mode

Press the [] button for at least 1 second.

Initial Setting

You can select following Initial Setting items.

1Select the Standby source Press the [SRC] button. Select the “STANDBY” display.

2Enter Function Setting mode

Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed.

3Select the function item

Turn the [VOL] knob and press it when the desired item is displayed.

Select “INITIAL SET” > Function item.

Function item	Selectable setting/item
“PRESET TYPE”	TYPE NORMAL (TYPE NORM):
	1 station can be assigned to 1 preset button in each
	of 4 bands (FM1, FM2, FM3, and AM), i.e., a total of
	24 stations (6 stations x 4 bands) can be preset.
	TYPE MIX:
	A total of 6 stations can be assigned to a total of 6
	preset buttons regardless of band (FM1, FM2, FM3,
	and AM). You can recall a preset station without
	switching between bands.
“KEY BEEP”	Setting the operation check sound (beep sound)
	on/off.
	OFF/ON

18 KDC-BT40U/KDC-BT30