Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Kenwood KDC-BT30, KDC-BT40U Installation, Removing the Hard Rubber Frame, Removing the Unit

1 40

Download 40 pages, 1.19 Mb

Installation/Removing the Unit

Installation

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

⁄

•Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

¤CAUTION

Install this unit in the console of your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

Removing the Hard Rubber Frame

1Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.

Lock

Catch

Accessory2

Removal tool

2When the upper level is removed, remove the lower two locations.

⁄

•The frame can be removed from the bottom side in the same manner.

Removing the Unit

1Refer to the section <Removing the Hard Rubber Frame> and then remove the hard rubber frame.

2Detach the faceplate.

3Insert the two removal tools deeply into the slots on each side, as shown.

4Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.

Accessory2

¤

•Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being careful not to drop it.

English 35

Contents

Page Before Use Other Functions Component names and functions General operation Bluetooth Setup 2WARNING To prevent injury or fire, take the following precautions: Before using this unit for the first time Cleaning the Unit About the Terminals of the Unit and Faceplate KDC-BT30 1Release button 2[SRC] button 3Disc slot 4Display window Before Using Common Operation Function Setting Operation Play function All Random Music Search Music Search for iPod Alphabet Search My Playlist for iPod Audio File/ iPod Setting iPod Control by Hand Mode Direct Music Search Station Preset Memory Tuner Setting PTY (Program Type) Program Type Preset Changing Language for PTY Function Connecting a Bluetooth Device Making a Call Calling a Number in the Phone Book Calling a Number in the Call Log Dial a Number Make a Voice Dialing Call Registering to the Preset Dial Number (Preset Memory) Speed Dialing (Preset Dial) Call Waiting Receiving a Call During a Call Other Functions Audio Control Display Selection Text Scroll Display Setting Auxiliary Input Display Setting Clock Adjustment Demonstration Mode Setting Initial Setting Removing the Faceplate How to Reset Your Unit Bluetooth Setup Registering Bluetooth Device (Pairing) Deleting a Registered Bluetooth Device Registering PIN Code Displaying the Firmware Version Downloading the Phone Book Selecting the Bluetooth Device You Wish to Connect Downloading the SMS SMS (Short Message Service) Adding a Voice Dialing Command Setting a Voice Command for Category General Control In iPod/CD/Audio file Source Hands-FreePhone Control In Tuner Source Preparing the remote control unit Changing the battery of the remote control unit ¤CAUTION About Audio file •Playable Audio file •Playable disc file format •Playable USB device (KDC-BT40Uonly) USB mass storage class •Playable USB device file system FAT16, FAT32 About the Cell-Phone Version Profile About “KENWOOD Music Editor” (KDC-BT40Uonly) The marking of products using lasers Function Item List In Standby In CD/ Audio file source In USB/ iPod source In Tuner source In Hands-FreeBT mode Accessories Installation Procedure Page Connector Function Guide Connecting the ISO Connector Installation Removing the Hard Rubber Frame Removing the Unit General Tuner source Disc source Audio file source Hands-freephoning The messages shown below display your systems condition Specifications USB Interface (KDC-BT40U) Bluetooth Section Audio Section Auxiliary Input Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: EU Representative’s: English