“RUSSIAN SET”

When this is set to ON, the following character

 

strings are displayed in Russian. (Folder name/ File

 

name/ Song title/ Artist name/ Album name)

 

OFF/ON

 

 

 

 

 

 

 

 

 

 

 

 

“P-OFF WAIT”

Setting the timer to turn this unit’s power OFF

 

automatically when Standby mode continues. Using

 

this setting can save the vehicle’s battery power.

 

– – –: Power OFF Timer function is OFF.

 

20M: Turns the power OFF after 20 minutes.

 

40M: Turns the power OFF after 40 minutes.

 

60M: Turns the power OFF after 60 minutes.

“BUILT-IN AUX”

When this is set to ON, AUX source can be selected.

(“BUILTIN AUX”)

ON1: Outputs the sound of external unit connected

 

to the AUX terminal when switched to AUX

 

source.

 

ON2: Activates the attenuator function when

 

turning on the power with AUX source

 

selected. Cancel the attenuator function

 

by turning the volume knob clockwise

 

when listening to the audio of the external

 

equipment.

 

OFF: Disables the selection of AUX source. Set to

 

OFF when not using the AUX terminal.

“CD READ”

Sets the method for reading CD.

 

1: Automatically distinguishes between audio file

 

disc and music CD when playing disc.

 

2: Forces playing as music CD.

“SWITCH PREOUT” Switches the preout between rear output (“REAR”) (“SWITCH PRE”) and subwoofer output (“SUB-W”)

REAR/SUB-W

“SP SELECT”

Fine-tuning so that the System Q value is optimal

 

when setting the speaker type as follows;

 

SP OFF: OFF

 

SP 5/4: For 5 & 4 in. speaker

 

SP 6*9/6: For 6 & 6x9 in. speaker

 

SP OEM: For the OEM speaker

“F/W UP”

Display the firmware version and update the

 

firmware.

 

MEDIA USB: Select a USB device.

 

MEDIA CD: Select CD.

 

(With the KDC-BT30, CD is selected.)

 

For how to update the firmware, access our web

 

site.

 

http://www.kenwood.com/cs/ce/

(Factory setting: Underlined)

4Make a setting

Turn the [VOL] knob and press it when the desired item is displayed.

5Exit Function Setting mode

Press the [ ] button for at least 1 second.

Removing the Faceplate

The faceplate of the unit can be detached and taken with you, helping to deter theft.

Detach the faceplate

Press the Release button.

Reattaching the Faceplate

Refer to the following diagram when reattaching the faceplate.

¤

•After pressing the Release button, detach the faceplate immediately. If the faceplate is left attached, it can fall due to vibration and so on.

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

•Keep the faceplate in its faceplate case while detached.

•Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

How to Reset Your Unit

If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.

1Release the faceplate lock so that it can be removed.

Refer to <Removing the Faceplate> (page 19).

2Press the Reset button and reattaching the faceplate.

Reset button

English 19