NAD T775 owner manual About XM Radio, About Dab Radio, operation, USING THE T 775 - AM/FM/DB/iPod

operation

USING THE T 775 – AM/FM/DB/iPod

About XM Radio

The T 775 is “XM Ready” which means that with the addition of separately sold XM Mini-Tuner CPC- 9000 and XM Mini-Tuner Home Dock, it has everything you need to listen to live XM. Everything else is built right in. Just subscribe to the XM service and your T 775 will be ready to receive XM content.

Notes

•Questions? Visit www.xmradio.com

Listeners can subscribe by visiting XM on the Web at www.xmradio.com or by calling (at the time of printing this manual) XM’s Listener Care at (800) 853 9696. Be ready with your Radio ID that can be found on the radio by selecting Channel 0.

•Check with your NAD audio specialist for other versions of XM Mini-Tuner compatible with T 775.

Connecting the XM antenna

1.Plug the end of the XM antenna into the corresponding XM antenna port on the rear panel of the T 775.

2.Press and hold “TUNER MODE” button on the front panel to check the current XM channel’s signal strength as shown in the VFD and OSD. Press “TUNER MODE” again to exit signal strength check.

Refer also to your XM radio’s guide on how to install the XM antenna for optimum signal reception.

Tuning Stations

There are three ways to tune to the XM channel you wish to listen. Make sure to set your HTR 3’s

Device Selector to “TUNER” prior to undertaking the following tuning options. The buttons refer to the corresponding keys on the HTR 3. The same keys correspond to the front panel navigation

buttons “PRESET	/ PRESET	/ TUNE	/ TUNE	.”
1. Manual Tuning : Toggle the		buttons to step up or down each available XM channel. Press
and hold	for faster scanning of XM channels. The HTR 3 keys “TUNE				/ TUNE	” will
likewise execute these same functions.

2.Direct Channel Call : Using the numeric keypads of the HTR 3, key-in directly the desired available channel number and it will be automatically tuned.

3.Category : Toggle “TUNER MODE” until “CATXM” and a corresponding category is displayed on the VFD. “CATXM” stands for the categories channels are grouped into – i.e., Country, Rock, Jazz & Blues,

etc. Toggle buttons to step up or down the available categories.

After selecting the desired category, use the same steps as that of XM Manual Tuning. Tuning

will only be limited to within the selected category. Toggle the	buttons to choose another
category and then tune again.

View XM Information

Toggle ‘INFO’ button to display the XM information of the selected channel such as the artist name, song title, category or any other text as supplied for the channel.

Presets

The procedure for storing XM channels is the same method as stated in the section “Setting Radio

Presets” under “Listening to Radio.”

For immediate recall of stored XM presets, toggle “TUNER MODE” button until “P__” (the two blank

spaces corresponding to the preset number) is shown in VFD. Press the front panel’s “PRESET			/
PRESET	” button or HTR 3’s	keys to step up or down the stored presets that can be a
combination of AM, FM and XM channels.

ABOUT DAB RADIO

The T 775 has a Digital Audio Broadcast (DAB) module socket on the rear panel for adding a separately sold and NAD-specified outboard DAB module – the NAD DAB Adaptor DB 1. All the control software for this format is included; just plug-in the module and start enjoying the CD-like quality sound and expansive content selection available with DAB.

CONNECTING THE DAB MODULE

Plug-in the other end of the DIN connector (supplied with your NAD DAB Adaptor DB 1) from the DAB module’s output port into the corresponding DAB module input socket on the rear panel of the T 775. Select DAB mode on the T 775 by toggling the ‘AM/FM/DB’ button in the front panel. If there is no NAD DAB Adaptor DB 1 connected, the VFD will show ‘Check DAB Tuner’.

Refer to your NAD DAB Adaptor DB 1’s owner’s manual for the module’s applicable user interface guide with respect to the T 775.

ENGLISH

FRANÇAIS

ESPAÑOL

ITALIANO

SVENSKA NEDERLANDS DEUTSCH

РУССКИЙ

33