NAD T775 owner manual Zone Controls

ENGLISH

FRANÇAIS

ESPAÑOL

ITALIANO

DEUTSCH NEDERLANDS SVENSKA

РУССКИЙ

operation

USING THE T 775 – MAIN MENU

Zone Controls

Depending on the settings made at the separate ‘Zone Setup’ menu under the ‘Setup Menu’ section discussion, the applicable Zone can be configured and managed via this ‘Zone Controls’ window.

Select ‘On’ to activate the applicable Zone. When activated, the Source input for the particular Zone can be allocated by selecting through the following inputs – All enabled Sources, Front Input, Media Player, Tuner and Local.

Select ‘LOCAL’ as your selected Zone’s Source input if you wish to enjoy the same source as the main

Zone and allow simultaneous listening, but with full separate volume levels.

If a Zone is set to ‘Off,’ it is deactivated or powered off.

‘Volume’ refers to the adjustable secondary Zone Volume level that can be increased or decreased

using thebuttons of the HTR 3 or front panel’s.

When a Zone is activated, a corresponding Zone number is illuminated at the VFD. Zone 2 is always available to be configured at ‘Zone Controls’ menu. For Zone 3 and Zone 4 to become available at the ‘Zone Controls’ window, their corresponding ‘Mode’ in the ‘Zone Setup’ menu under the ‘Setup Menu’ section should be set to ‘Zone (Audio Only).’

Note

The ZR 4 remote control will only control Zone 2 applications. Zone 3 and Zone 4 could be configured and managed at the appropriate Zone OSD menu using the front panel navigations buttons as well as the corresponding keys on the HTR 3 remote control.

16