16 English
PAR
iPod
VOICE
TAG
Press and hold to easy pairing mode.
Getting Started of Bluetooth

Easy Pairing function

1 Press and hold to enter easy pairing
mode
“PAIRING” is displayed.
■■Any of the following is displaye d
depending on Bluetooth device
registration condition:
–“SEARCHING”: When registering a
Bluetooth device for the first time.
–“(device name)”: When a Bluetooth
device has already been registered.
–“DEVICE FULL”: When a maximum of five
Bluetooth devices have already been
registered.
■■To cancel the easy pairing mode, pres s .
When registering a Bluetooth device for the
first time (Registering a Bluetooth dev ice)
2 “SEARCHING” is disp layed.
Search for the Bluetooth device.
When search is completed, “FINISHED” is
displayed.
3 Turn the volume knob to se lect a
Bluetooth device name, press to confirm.
4 “CONFIRM DVC” is displayed.
If “PAIRING OK” is displayed, proceed to
step 7.
If “PIN CODE” is displayed, proceed to steps
5.
If “*** NG” is displayed, press the volume
knob. Proceed to steps 4.
5 Input the PIN cod e
■■To select the number, turn the volum e
knob.
■■To move to the next digit, press ¢.
■■To delete the last digit, press 4.
6 Press the volume k nob to transmit the
PIN code.
If “PAIRING OK” is displayed, registration is
completed.
When “CONFIRM DVC” is displayed, confirm
connection with a Bluetooth device
operation.
7 The receive r is connected to a Bluetooth
device, with “HF CONNECT” or “AUD
CONNECT” displayed, and exits the easy
pairing mode.
■■If an error code is displayed duri ng paring,
see <Troubleshooting> (page 32).
■■If the error messa ge appears even though
the PIN code is correct, try the procedure
mentioned in <Registering a Special
Bluetooth device> (page 22).
When a Bluetooth device has already bee n
registered, or maximum of five Blue tooth
devices have already been registered
(Selecting a Bluetooth device)
2 “(device name)” or “DEV ICE FULL” is
displayed.
3 Turn the volume knob to se lect a
Bluetooth device name.
B64-4935-00_01_K.indb 16 11/12/21 9:39