22 English
Bluetooth Setup

Registering a Bluetooth Device

(Pairing)

Registering from this unit
1 Press to enter Bluetooth mode.
2 Turn the volume knob to se lect
[SETTINGS], then press to enter.
3 Turn the volume knob to se lect
[PAIRING], then press to enter.
4 Turn the volume knob to se lect [DEVICE
SEARCH], then press to enter.
Search for the Bluetooth device.
When search is completed, “FINISHED” is
displayed.
5 Turn the volume knob to se lect a
Bluetooth device name, press to confirm.
6 “CONFIRM DVC” is displayed
If “PAIRING OK” is displayed, proceed to
step 9.
If “PIN CODE” is displayed, proceed to steps
7.
If “*** NG” is displayed, press the volume
knob. Proceed to steps 6.
7 Input the PIN cod e
■■To select the number, turn the volum e
knob.
■■To move to the next digit, press ¢.
■■To delete the last digit, press 4.
8 Press the volume k nob to transmit the
PIN code.
If “PAIRING OK” is displayed, registration is
completed. If the error message appears
even though the PIN code is correct, try
the procedure mentioned in <Registering a
Special Bluetooth device>.
9 Hold to finish the pro cedure.
■■To cancel the Bluetooth mode, press .
■■If there are 5 or more Bluetoot h devices
registered, you cannot register a new
Bluetooth device.
Registering a Special Bluetooth device
1 Press to enter Bluetooth mode.
2 Turn the volume knob to se lect
[SETTINGS], then press to enter.
3 Turn the volume knob to se lect
[PAIRING], then press to enter.
4 Turn the volume knob to se lect [S-DVC
SELECT], then press to enter.
5 Turn the volume knob to se lect a device
name, press to confirm.
6 Go through th e procedure step 4
of <Registering from this unit> and
complete the registration (pairing).
■■If the device name is not in th e list, select
“OTHER PHONE”.

Selecting the Bluetooth Device

1 Press to enter Bluetooth mode.
2 Turn the volume knob to se lect
[SETTINGS], then press to enter.
3 Turn the volume knob to se lect
[PAIRING], then press to enter.
4 Turn the volume knob to se lect [PHONE
SELECT] or [AUDIO SEL ECT] , then press
to enter.
5 Turn the volume knob to se lect a
Bluetooth device name.
6 Press the volume k nob to set up the
Bluetooth device.
■■“✱ (device name)”: The selected
Bluetooth device is busy.
■■“- (device name)”: The selected Blueto oth
device is on standby.
■■“(blank) (device name)“: The Bluetooth
device is deselected.
■■If a cell-phone is alread y selected,
deselect it, and then select a different
one.
7 Hold to finish the pro cedure.
■■To cancel the Bluetooth mode, press .

Bluetooth Device Registration Test

You can check whether your Bluetooth device
can be registered using this unit.
1 Press and hold to enter easy pairing
mode
“PAIRING” is displayed.
Search for the Bluetooth device.
When search is completed, “FINISHED” is
B64-4935-00_01_K.indb 22 11/12/21 9:39