32 English

Installing the Microphone Unit (KDC-X796 only)

1 Check the inst allation position of the
microphone H.
2 Remove oil and oth er dirt from the
installation surface.
3 Install the mi crophone.
4 Wire the micro phone cable up to the
hands-free box with it secured at several
positions using tape or the like.
■■Install the microph one as far away as
possible from the cell-phone.
H
Fix a cable with a commercial
item of tape.
Peel off the release
coated paper of
double-face adhesive
tape to secure the
microphone on the
place shown above.
Turn the microphone
toward the driver.
Troubleshooting
Symptom Remedy/Cause
Sound cannot be heard. Adjust the volume to the optimum level. / Check the c ords and connecti ons.
“PROTECT” appears and no operations can
be done.
Check to be sure the terminals of the speaker leads are c overed with insulatin g tape
properly, then reset the unit. If “PROTECT” d oes not disappear, consul t your nearest
service center.
The unit does not work at all. Reset the unit.
Radio reception is poor. / Static noise while
listening to the radio.
Connect the antenna firmly. / Pull the antenna out all t he way.
“MEMORY FULL” appears. The tag memory of HD Radio receiver is full.
“NO TAG FNC” appears. The connected iPod do es not support iTunes t agging functio n.
“TAG ERROR” appears. The unit is unable to comp lete transferr ing the tagged info rmation to the iPod.
“IN” flashes. The CD player is not operating properly. Reinser t the disc properly. If t he condition did
not improve, turn off the unit and consult your n earest service ce nter.
CD-R/CD-RW cannot be played back and
tracks cannot be skipped.
Insert a finalized CD-R/CD-RW (fi nalize with the compon ent which you used for
recording).
Disc sound is sometimes interrupted. Stop playback while driving on rough roads. / Cha nge the disc. / Check t he cords and
connections.
“NA FILE” appears. The unit is playing an unsupported audio fi le.
“NO DISC” appears. Insert a playable disc into the loading slot.
B64-4935-00_01_K.indb 32 11/12/21 9:39