Menu system
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
Display | Setting |
"BEEP ON" | Beep is heard. |
"BEEP OFF" | Beep canceled. |
In Standby mode
Manual Clock Adjustment
1Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.
2Enter Clock Adjust mode
Press the Control knob for at least 1 second. The clock display blinks.
3Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or [¢].
4Exit Clock adjustment mode Press the [MENU] button.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
Display | Setting |
"DSI ON" | LED flashes. |
"DSI OFF" | LED OFF. |
Display Illumination Control
This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"DISP ON" | Keeps the display on. |
"DISP OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
•Set the Display Illumination Control when the <Demonstration mode Setting> (page 24) is set to OFF.
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Ejecting the disc
•Turning off the power
•Dimmer Control
•During function control, such as the Menu System, the display stays on.
Function of the
In Standby mode
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"DIM ON" | The display dims. |
"DIM OFF" | The display doesn’t dim. |
22 English