Kenwood KDC-PS9018R Audio Control Setting

Adjust various parameters of sound quality.

Press the AUD button for at least one second to enter the

control mode.

Selecting mode

Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will

change.

Please refer to the following for the contents of the

adjustment modes.

Source tone memory

Each source ( tape, CD, MD, FM, AM and disc changer ) has its

own memory in which to store the bass, middle, treble and N-F

level settings.

The settings made for a particular source are recalled

automatically whenever you use that source ( for example, FM

mode uses the tone settings made for FM, AM for AM, etc.).

Adjust each mode

Press the 4/¢button.

Please refer to the following for the adjusting values.

Press the AUD button to end the control mode.

•Determining the parameters in the audio control setting would

clear all the adjustments made in the System Q and they are

replaced with the values in the audio control setting.

•The following parameters can be set when the System Q

function on the menu settings is ON.

Bass center frequency, bass quality factor, bass extend, middle

center frequency, middle quality factor, and treble center

frequency.

NOTE

4

3

NOTE

2

1

Audio Control Setting

Audio control features

— 15 —

PTY

LOUD

OFF

NF

DAB

AUD

VOL ADJ

MENU

ANG

NAME

DISP

AMAUD

FM

¢

4

Setting value

Selecting mode

KDC-PS9018R(M_E)_r3 2003.06.13 03:04 PM Page 15

Contents

Main Contents Safety precautions...................3 Handling Compact discs...........5 General features Audio control features Tuner features RDS features CLASS 1 LASER PRODUCT Safety precautions NOTE Cleaning the Faceplate Terminals Reset button Safety precautions Cleaning the CD Slot Lens Fogging Page Handling Compact discs Do Not Load CD Accessories Removing the CD Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled Side Volume Power Loudness Attenuator Switching Modes Switching Full-Screen Display Faceplate Angle Adjustment Switching the Lower Part Display Switching the Upper Part Display Page Removing the Faceplate Forced Closing System Q Non-Fading Output Speaker & Woofer setting TEL Mute Audio Control Setting Page Phase for Non-Fading Output Low-pass Filter Frequency for Non-Fading Output Non-Fading Level High-pass Filter Frequency for Front Output High-pass Filter Frequency for Rear Output Tuner features Volume Offset Station Preset Memory Tuning Preset station seek with Program service name Tuner features Alarm RDS (Radio Data System) Enhanced Other Network Program Type (PTY) Function Traffic Information Function Presetting Volume for Traffic Information/News Page Page Playing CDs Disc Search (Function of disc changers) Playing Other Disc mode Track Search Fast Forwarding and Reversing Disc Play Random Play Track Scan Track / Disc Repeat Presetting Disc Names (DNPS) Magazine Random Play (Function of disc changers) Text Scroll Page Disc Name Preset Play (DNPP) Menu System 7 Security Code <In Stand by mode> Page Automatic Time Adjustment Memo Mode 8 7 Page External Amp Control Time setting for removing the faceplate System Q Built-in Amp Mute Control <In Stand by mode> Dual Zone System <In AUX mode> Selecting Tuning Mode <In Tuner mode> Local Seek Function <In Tuner mode> News Bulletin Function with PTY News Timeout Setting Restricting RDS Region (Region Restrict Function) Auto Memory Entry <In Tuner mode> AF (Alternative Frequency) Function Basic Operations of remote Text Scroll + TUNE +//TRACK + OK SRC Basic operations Basic Operations of remote CD/External disc control features Tuner features Page Connecting Wires to Terminals Page Page Installing Radio Bracket in Japanese-made Cars (J-Cars) Installation (Japanese-cars) Page Page CD/External disc control mode If the following situations, consult your nearest service center: